{"title":"Temperature sensors Wireless Modbus","description":"","products":[{"product_id":"anlegetemperatur-rohranlegemessumformer-thermasgard-altm1-wmodbus-ip65-w-modbus-kabelverschraubung-1101-12bf-0000-000","title":"THERMASGARD® ALTM1-wModbus","description":"Calibratable contact temperature measuring transducer (compact version) THERMASGARD® ALTM 1 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, pipe feeder, incl. clamping strap, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus). With device variant wModbus, the W-Modbus (Wireless)\u003cbr\u003ereplaces the RTU cable, the BMS connection is radio-based via a W-Modbus gateway.\u003cbr\u003e\u003cbr\u003eThe pipe contact sensor is used to measure the temperature on pipes, pipes (e.g. cold and hot water) or on heating pipes for heating control. \u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254847603019,"sku":"1101-12BF-0000-000","price":232.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTM-1-wModbus__tyr3_maxi-mL_4c.png?v=1769760065"},{"product_id":"anlegetemperatur-rohranlegemessumformer-thermasgard-altm1-wmodbus-lcd-ip65-w-modbus-kabelverschraubung-1101-12bf-4000-000","title":"THERMASGARD® ALTM1-wModbus LCD","description":"Calibratable contact temperature measuring transducer (compact version) THERMASGARD® ALTM 1 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, pipe feeder, incl. clamping strap, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus). With device variant wModbus, the W-Modbus (Wireless)\u003cbr\u003ereplaces the RTU cable, the BMS connection is radio-based via a W-Modbus gateway.\u003cbr\u003e\u003cbr\u003eThe pipe contact sensor is used to measure the temperature on pipes, pipes (e.g. cold and hot water) or on heating pipes for heating control. \u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254848422219,"sku":"1101-12BF-4000-000","price":293.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTM-1-wModbus-Display__tyr3_maxi-mL_4c.png?v=1769760126"},{"product_id":"aussen-feuchtraum-temperaturmessumformer-thermasgard-atm2-wmodbus-ip65-w-modbus-kabelverschraubung-1101-12cf-0000-000","title":"THERMASGARD® ATM2-wModbus","description":"Calibratable outdoor temperature measuring transducer THERMASGARD® ATM 2 - Modbus - T3, with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The surface-mounted sensor is used to measure the temperature in gaseous media. It is used outdoors or in damp rooms, in cold stores and greenhouses, in industry and in agriculture. Installation on external walls is preferably on the north side or in a protected location. In direct sunlight, the WS 01 or WS 04 sun and ball impact protection (accessories) must be used.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254860153163,"sku":"1101-12CF-0000-000","price":227.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ATM-2-wModbus__tyr3_maxi-mL_4c.png?v=1769650408"},{"product_id":"aussen-feuchtraum-temperaturmessumformer-thermasgard-atm2-wmodbus-lcd-ip65-w-modbus-kabelverschraubung-1101-12cf-4000-000","title":"THERMASGARD® ATM2-wModbus LCD","description":"Calibratable outdoor temperature measuring transducer THERMASGARD® ATM 2 - Modbus - T3, with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The surface-mounted sensor is used to measure the temperature in gaseous media. It is used outdoors or in damp rooms, in cold stores and greenhouses, in industry and in agriculture. Installation on external walls is preferably on the north side or in a protected location. In direct sunlight, the WS 01 or WS 04 sun and ball impact protection (accessories) must be used.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254860742987,"sku":"1101-12CF-4000-000","price":287.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ATM-2-wModbus-Display__tyr3_maxi-mL_4c.png?v=1769650449"},{"product_id":"anlegetemperatur-rohranlegemessumformer-thermasgard-altm2-wmodbus-ip65-w-modbus-kabelverschraubung-1101-62bf-0210-000","title":"THERMASGARD® ALTM2-wModbus","description":"Calibratable contact temperature measuring transducer (remote version) THERMASGARD® ALTM 2 - Modbus - T3 ALTM 2 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with pipe feeder, incl. clamping strap, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe pipe contact sensor is used to measure the temperature on pipes, tubes (e.g. cold and hot water) or on heating pipes for heating control.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254872539467,"sku":"1101-62BF-0210-000","price":240.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTM-2-wModbus__tyr3_maxi-mL_4c.png?v=1769760301"},{"product_id":"anlegetemperatur-rohranlegemessumformer-thermasgard-altm2-wmodbus-lcd-ip65-w-modbus-kabelverschraubung-1101-62bf-4210-000","title":"THERMASGARD® ALTM2-wModbus LCD","description":"Calibratable contact temperature measuring transducer (remote version) THERMASGARD® ALTM 2 - Modbus - T3 ALTM 2 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with pipe feeder, incl. clamping strap, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe pipe contact sensor is used to measure the temperature on pipes, tubes (e.g. cold and hot water) or on heating pipes for heating control.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254872998219,"sku":"1101-62BF-4210-000","price":300.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTM-2-wModbus-Display__tyr3_maxi-mL_4c.png?v=1769760339"},{"product_id":"huelsenfuehler-mit-temperaturmessumformer-thermasgard-hftm-wmodbus-ip65-w-modbus-kabelverschraubung-1101-62af-0210-000","title":"THERMASGARD® HFTM-wModbus","description":"Calibratable sleeve temperature measuring transducer THERMASGARD® HFTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with stainless steel sleeve, optionally with\/without display, measures temperature (-50...+150 °C).  International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe sleeve sensor is used to measure the temperature in liquid and gaseous media.  It is used as a duct sensor or as an immersion and screw-in sensor in liquids by means of installation in immersion sleeve THE (accessory).\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254910484811,"sku":"1101-62AF-0210-000","price":232.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HFTM-wModbus__tyr3_maxi-mL_4c.png?v=1769678776"},{"product_id":"huelsenfuehler-mit-temperaturmessumformer-thermasgard-hftm-wmodbus-lcd-ip65-w-modbus-kabelverschraubung-1101-62af-4210-000","title":"THERMASGARD® HFTM-wModbus LCD","description":"Calibratable sleeve temperature measuring transducer THERMASGARD® HFTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with stainless steel sleeve, optionally with\/without display, measures temperature (-50...+150 °C).  International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe sleeve sensor is used to measure the temperature in liquid and gaseous media.  It is used as a duct sensor or as an immersion and screw-in sensor in liquids by means of installation in immersion sleeve THE (accessory).\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254911828299,"sku":"1101-62AF-4210-000","price":291.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HFTM-wModbus-Display__tyr3_maxi-mL_4c.png?v=1769678814"},{"product_id":"raumpendel-temperaturmessumformer-thermasgard-rptm1-wmodbus-ip65-w-modbus-kabelverschraubung-1101-628f-0210-000","title":"THERMASGARD® RPTM1-wModbus","description":"Calibratable room pendulum temperature transmitter (with sleeve) THERMASGARD® RPTM1 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with stainless steel sleeve and plastic sintered filter (replaceable), optionally with\/without display, measures temperature (-50...+150 °C).  International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe pendulum sensor is specially designed for recording the temperature in larger rooms or halls. The resistance thermometer (globe thermometer) achieves a very good, representative measurement result due to its positioning in the room. \u003cbr\u003eCalibratable room pendulum temperature transmitter (with globe) THERMASGARD® RPTM 2 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with black plastic globe, optionally with\/without display, measures temperature (-50...+150 °C). International unit system SI (default) can be switched to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254936699211,"sku":"1101-628F-0210-000","price":279.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPTM-1-wModbus__tyr3-K_maxi-mL_4c.png?v=1762920557"},{"product_id":"raumpendel-temperaturmessumformer-thermasgard-rptm1-wmodbus-lcd-ip65-w-modbus-kabelverschraubung-1101-628f-4210-000","title":"THERMASGARD® RPTM1-wModbus LCD","description":"Calibratable room pendulum temperature transmitter (with sleeve) THERMASGARD® RPTM1 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with stainless steel sleeve and plastic sintered filter (replaceable), optionally with\/without display, measures temperature (-50...+150 °C).  International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe pendulum sensor is specially designed for recording the temperature in larger rooms or halls. The resistance thermometer (globe thermometer) achieves a very good, representative measurement result due to its positioning in the room. \u003cbr\u003eCalibratable room pendulum temperature transmitter (with globe) THERMASGARD® RPTM 2 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with black plastic globe, optionally with\/without display, measures temperature (-50...+150 °C). International unit system SI (default) can be switched to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254937256267,"sku":"1101-628F-4210-000","price":340.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPTM-1-wModbus-Display__tyr3-K_maxi-mL_4c.png?v=1762920593"},{"product_id":"raumpendel-temperaturmessumformer-thermasgard-rptm2-wmodbus-ip65-w-modbus-kabelverschraubung-1101-629f-0210-000","title":"THERMASGARD® RPTM2-wModbus","description":"Calibratable room pendulum temperature transmitter (with sleeve) THERMASGARD® RPTM1 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with stainless steel sleeve and plastic sintered filter (replaceable), optionally with\/without display, measures temperature (-50...+150 °C).  International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe pendulum sensor is specially designed for recording the temperature in larger rooms or halls. The resistance thermometer (globe thermometer) achieves a very good, representative measurement result due to its positioning in the room. \u003cbr\u003eCalibratable room pendulum temperature transmitter (with globe) THERMASGARD® RPTM 2 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with black plastic globe, optionally with\/without display, measures temperature (-50...+150 °C). International unit system SI (default) can be switched to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254938992971,"sku":"1101-629F-0210-000","price":286.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPTM-2-wModbus__tyr3_maxi-mL_4c.png?v=1762920659"},{"product_id":"raumpendel-temperaturmessumformer-thermasgard-rptm2-wmodbus-lcd-ip65-w-modbus-kabelverschraubung-1101-629f-4210-000","title":"THERMASGARD® RPTM2-wModbus LCD","description":"Calibratable room pendulum temperature transmitter (with sleeve) THERMASGARD® RPTM1 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with stainless steel sleeve and plastic sintered filter (replaceable), optionally with\/without display, measures temperature (-50...+150 °C).  International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe pendulum sensor is specially designed for recording the temperature in larger rooms or halls. The resistance thermometer (globe thermometer) achieves a very good, representative measurement result due to its positioning in the room. \u003cbr\u003eCalibratable room pendulum temperature transmitter (with globe) THERMASGARD® RPTM 2 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with black plastic globe, optionally with\/without display, measures temperature (-50...+150 °C). International unit system SI (default) can be switched to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254939418955,"sku":"1101-629F-4210-000","price":347.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPTM-2-wModbus-Display__tyr3_maxi-mL_4c.png?v=1762920695"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-0-4m-ip65-w-modbus-kabelverschraubung-1101-326f-0080-000","title":"THERMASGARD® MWTM-wModbus 0.4M","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254974677323,"sku":"1101-326F-0080-000","price":308.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus__tyr3-rute-gerade_maxi-mL_4c.png?v=1769687794"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-3m-ip65-w-modbus-kabelverschraubung-1101-326f-0230-000","title":"THERMASGARD® MWTM-wModbus 3M","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254974808395,"sku":"1101-326F-0230-000","price":366.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus__tyr3_maxi-mL_4c.png?v=1769687821"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-6m-ip65-w-modbus-kabelverschraubung-1101-326f-0260-000","title":"THERMASGARD® MWTM-wModbus 6M","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254974939467,"sku":"1101-326F-0260-000","price":408.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus__tyr3_maxi-mL_4c_e47b4a4d-3f79-4c16-9899-4fd4e2e04aa9.png?v=1769687876"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-0-4m-lcd-ip65-w-modbus-kabelverschraubung-1101-326f-4080-000","title":"THERMASGARD® MWTM-wModbus 0.4M LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254975201611,"sku":"1101-326F-4080-000","price":367.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus-Display__tyr3-rute-gerade_maxi-mL_4c.png?v=1769687808"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-3m-lcd-ip65-w-modbus-kabelverschraubung-1101-326f-4230-000","title":"THERMASGARD® MWTM-wModbus 3M LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254975463755,"sku":"1101-326F-4230-000","price":426.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus-Display__tyr3_maxi-mL_4c.png?v=1769687860"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-6m-lcd-ip65-w-modbus-kabelverschraubung-1101-326f-4260-000","title":"THERMASGARD® MWTM-wModbus 6M LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254975627595,"sku":"1101-326F-4260-000","price":468.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus-Display__tyr3_maxi-mL_4c_2e47e0f0-d448-4e22-8ef3-ed3dd10bad78.png?v=1769687915"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-50mm-ip65-w-modbus-kabelverschraubung-1101-723f-0010-000","title":"THERMASGARD® TM65-wModbus 50MM","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255109157195,"sku":"1101-723F-0010-000","price":227.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus__tyr3_maxi-mL_4c.png?v=1762945247"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-100mm-ip65-w-modbus-kabelverschraubung-1101-723f-0020-000","title":"THERMASGARD® TM65-wModbus 100MM","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255109484875,"sku":"1101-723F-0020-000","price":227.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus__tyr3_maxi-mL_4c_5a029df9-05b3-4676-a9c0-8c07e3d5fe3a.png?v=1762944726"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-150mm-ip65-w-modbus-kabelverschraubung-1101-723f-0030-000","title":"THERMASGARD® TM65-wModbus 150MM","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255109615947,"sku":"1101-723F-0030-000","price":227.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus__tyr3_maxi-mL_4c_c39a1926-38a7-41af-9866-dbfcf6953c3f.png?v=1762944802"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-200mm-ip65-w-modbus-kabelverschraubung-1101-723f-0040-000","title":"THERMASGARD® TM65-wModbus 200MM","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255111221579,"sku":"1101-723F-0040-000","price":227.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus__tyr3_maxi-mL_4c_6073dab6-4a68-417c-9b0d-2c6a73e0e69f.png?v=1762944876"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-250mm-ip65-w-modbus-kabelverschraubung-1101-723f-0050-000","title":"THERMASGARD® TM65-wModbus 250MM","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circulation systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255111450955,"sku":"1101-723F-0050-000","price":228.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus__tyr3_maxi-mL_4c_faa82ff7-e47d-4895-85b9-cc974c4d685f.png?v=1762944950"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-300mm-ip65-w-modbus-kabelverschraubung-1101-723f-0060-000","title":"THERMASGARD® TM65-wModbus 300MM","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circulation systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255111680331,"sku":"1101-723F-0060-000","price":229.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus__tyr3_maxi-mL_4c_20911333-7509-4d7a-b452-1c55a4c80db5.png?v=1762945024"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-350mm-ip65-w-modbus-kabelverschraubung-1101-723f-0070-000","title":"THERMASGARD® TM65-wModbus 350MM","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circulation systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255111844171,"sku":"1101-723F-0070-000","price":230.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus__tyr3_maxi-mL_4c_902b55ab-ba3b-4960-9700-68c811b63759.png?v=1762945098"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-400mm-ip65-w-modbus-kabelverschraubung-1101-723f-0080-000","title":"THERMASGARD® TM65-wModbus 400MM","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circulation systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255112040779,"sku":"1101-723F-0080-000","price":231.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus__tyr3_maxi-mL_4c_6e171ded-34ad-427e-8ea3-3be18a94c4fd.png?v=1762945173"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-50mm-lcd-ip65-w-modbus-kabelverschraubung-1101-723f-4010-000","title":"THERMASGARD® TM65-wModbus 50MM LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255112368459,"sku":"1101-723F-4010-000","price":286.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus-Display__tyr3_maxi-mL_4c.png?v=1762945295"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-100mm-lcd-ip65-w-modbus-kabelverschraubung-1101-723f-4020-000","title":"THERMASGARD® TM65-wModbus 100MM LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255112597835,"sku":"1101-723F-4020-000","price":287.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus-Display__tyr3_maxi-mL_4c_9cb54d29-b8cf-45b4-b50a-b33b2289cc02.png?v=1762944773"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-150mm-lcd-ip65-w-modbus-kabelverschraubung-1101-723f-4030-000","title":"THERMASGARD® TM65-wModbus 150MM LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255113023819,"sku":"1101-723F-4030-000","price":287.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus-Display__tyr3_maxi-mL_4c_e5c302de-9270-42e1-a8cb-e4a2b5889cc8.png?v=1762944848"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-200mm-lcd-ip65-w-modbus-kabelverschraubung-1101-723f-4040-000","title":"THERMASGARD® TM65-wModbus 200MM LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circulation systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255113318731,"sku":"1101-723F-4040-000","price":287.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus-Display__tyr3_maxi-mL_4c_104d9707-2c1d-4a6d-870a-2da33f1aceb3.png?v=1762944922"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-250mm-lcd-ip65-w-modbus-kabelverschraubung-1101-723f-4050-000","title":"THERMASGARD® TM65-wModbus 250MM LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255113548107,"sku":"1101-723F-4050-000","price":288.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus-Display__tyr3_maxi-mL_4c_67f41a25-5925-4723-a114-8782d519941f.png?v=1762944996"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-300mm-lcd-ip65-w-modbus-kabelverschraubung-1101-723f-4060-000","title":"THERMASGARD® TM65-wModbus 300MM LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255114072395,"sku":"1101-723F-4060-000","price":288.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus-Display__tyr3_maxi-mL_4c_736608d0-2d12-4919-9c28-96e13b0a43a3.png?v=1762945072"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-350mm-lcd-ip65-w-modbus-kabelverschraubung-1101-723f-4070-000","title":"THERMASGARD® TM65-wModbus 350MM LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255114170699,"sku":"1101-723F-4070-000","price":290.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus-Display__tyr3_maxi-mL_4c_995ae7c5-0acb-4408-a5c1-33e68a851d96.png?v=1762945146"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-400mm-lcd-ip65-w-modbus-kabelverschraubung-1101-723f-4080-000","title":"THERMASGARD® TM65-wModbus 400MM LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255114334539,"sku":"1101-723F-4080-000","price":291.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus-Display__tyr3_maxi-mL_4c_0966318d-4317-4327-adc5-0e8216190747.png?v=1762945220"},{"product_id":"raumfuehler-feuchte-temperatur-hygrasgard-rftf-wmodbus-w-modbus-1201-41bf-1000-000","title":"HYGRASGARD® RFTF-wModbus","description":"The calibratable room sensor HYGRASGARD® RFTF - Modbus with Modbus connection, in an elegant plastic housing (Baldur 2) with snap-on lid, lower part with 4-hole mounting, optionally with\/without display, measures humidity (0...100 % RH) and temperature (0...+50 °C) with wModbus (- 35...+80 °C). The following parameters are calculated internally from these measured variables and can be queried via Modbus: absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure). International system of units SI (default) can be switched to Imperial (via Modbus). With device variant wModbus, the W-Modbus (wireless) replaces the RTU cable, the BMS connection is radio-based via an W-Modbus gateway. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results.  The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment. Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display and two-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range).","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255244489035,"sku":"1201-41BF-1000-000","price":241.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RFF-RFTF__baldur2_maxi-mL_4c_f8166c47-4de9-49be-a697-2b11707128b0.png?v=1762920129"},{"product_id":"raumbediengeraet-controller-24-v-rymaskon-rym-1321c-rh-wmod-w-modbus-0-10v-weiss-24-v-ac-dc-rym1-3211-w210-000","title":"RYMASKON® RYM 1321C-RH-WMOD","description":"The room control units of the Rymaskon® 1000 series are designed to control (up to 2 zones) in residential, hotel and office rooms and individually regulate the heating, cooling and fan stages of the indoor space. The controller variants can be operated as stand-alone devices using the integrated control functions PI, PWM or 2-\/3-point control. The product family is characterized by its elegant design, intuitive operation and the many combination options of the individual components. \u003cbr\u003e The room control units Rymaskon® 1000 C (controller) are used for controlling and regulating heating fan convectors and fan coil units (fancoil). Depending on the type variant, the devices are available with analog outputs (0 -10 V) as well as with digital \/ relay outputs for controlling heating valves, cooling valves, 6-way valves, stepped fans or EC fans. The control is performed via PI, PWM or 2-\/3-point control. With the changeover function, 2- and 4-pipe systems can be operated.\u003cbr\u003eThe Modbus communication interface or W-Modbus makes it possible at any time to change and monitor the HVAC parameters on the controller via the BMS. In addition, the functions solar shading (roller shutters, louvres) or lighting (with dimming function) can be controlled via the bus. The optical indication is provided by a 2\" TFT display, and operation is via capacitive keys (touchkeys). \u003cbr\u003e \u003cbr\u003eIn addition to the integrated temperature and humidity sensor, sensors for CO2 and VOC are available optionally. Furthermore, an input for a passive temperature sensor (NTC10K) and an input for a potential-free contact are provided. This enables, for example, a window contact or a condensation monitor to be connected. This means all options are available to flexibly and individually climate the rooms. \u003cbr\u003eAll device types are available in the timeless Iduna 3 enclosure (112 x 89.5 x 24 mm) in the colors white or black. Wall mounting is carried out on standard flush-mount back boxes. ","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255446569291,"sku":"RYM1-3211-W210-000","price":328.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RYM-1301__persp_maxi-mL_4c_eb096740-49ba-4321-92a2-9252620332b9.png?v=1762865107"},{"product_id":"raumbediengeraet-controller-24-v-rymaskon-rym-1322c-rh-wmod-w-modbus-0-10v-schwarz-24-v-ac-dc-rym1-3221-w210-000","title":"RYMASKON® RYM 1322C-RH-WMOD","description":"The room control units of the Rymaskon® 1000 series are designed for controlling (up to 2 HVAC zones) in residential, hotel and office rooms, and individually regulate the heating, cooling and fan stages of the interior. The controller variants can be operated as stand-alone units using the integrated control functions PI, PWM or 2-\/3-point control. The product family is characterized by its elegant design, intuitive operation and the many combination options of the individual components. \u003cbr\u003e The Rymaskon® 1000 C room control units (controllers) are used for control and regulation of heating fan convectors and blower fan convectors (fan coil). Depending on the type variant, the units are available with analog outputs (0 -10 V) as well as with digital \/ relay outputs for controlling heating valves, cooling valves, 6-way valves, staged fan stages or EC fan stages. The control is performed via PI, PWM or 2-\/3-point control. With the changeover function, 2-pipe and 4-pipe systems can be operated.\u003cbr\u003eThe Modbus communication interface or W-Modbus allows the HVAC parameters to be changed and monitored on the controller at any time via the BMS. In addition, functions for solar shading (roller shutters, blinds) or lighting (with dimming function) can also be controlled over the bus. The visual indication is provided via a 2\" TFT display; operation is via capacitive keys (touchkeys). \u003cbr\u003e \u003cbr\u003eIn addition to the integrated temperature and humidity sensor, optional sensors for CO2 and VOC are available. Furthermore, an input for a passive temperature sensor (NTC10K) and an input for a potential-free contact are provided. This means, for example, a window contact or a condensation alarm can be connected. As a result, all options are available to flexibly and individually climate the rooms. \u003cbr\u003eAll device types are available in the timeless Iduna 3 enclosure (112 x 89.5 x 24 mm) in white or black. Wall mounting is performed on standard flush-mounting boxes. ","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255447191883,"sku":"RYM1-3221-W210-000","price":328.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RYM-1302__persp_maxi-mL_4c_cf099f75-e9aa-4a5c-870b-e610fa9f4817.png?v=1762925297"},{"product_id":"raumbediengeraet-controller-24-v-rymaskon-rym-1361c-rh-wmod-w-modbus-0-10v-schaltend-weiss-24-v-ac-dc-rym1-3611-w210-000","title":"RYMASKON® RYM 1361C-RH-WMOD","description":"The room operating devices of the series Rymaskon® 1000 are designed to control (up to 2 HVAC zones) in residential, hotel and office rooms and individually regulate the indoor heating, cooling and fan stages. The controller variants can be operated as stand-alone units using the integrated control functions PI, PWM or 2-\/3-point control. The product family is characterized by its elegant design, intuitive operation and the many combination options of the individual components. \u003cbr\u003e The room operating devices Rymaskon® 1000 C (controllers) are used to actuate and control heating fan convectors and fan-coil units. Depending on the type variant, the units are available with analog outputs (0 -10 V) as well as with digital \/ relay outputs for controlling heating valves, cooling valves, 6-way valves, stepped fans or EC fans. The actuation is performed via PI, PWM or 2-\/3-point control. With the changeover function, 2- and 4-pipe systems can be operated.\u003cbr\u003eThe Modbus communication interface or W-Modbus enables the HVAC parameters to be changed and monitored at any time on the controller via the BMS. In addition, functions for solar shading (roller shutters, blinds) or lighting (with dimming function) can be controlled via the bus. The optical display is provided via a 2\" TFT display, and operation is via capacitive keys (Touchkeys). \u003cbr\u003e \u003cbr\u003eBesides the integrated temperature and humidity sensor, sensors for CO2 and VOC are available as options. Furthermore, an input for a passive temperature sensor (NTC10K) and an input for a potential-free contact are available. For example, a window contact or a condensation monitor can be connected. This ensures that all options are available to climate-control rooms flexibly and individually. \u003cbr\u003eAll device types are available in the timeless Iduna 3 enclosure (112 x 89.5 x 24 mm) in the colors white or black. Wall mounting is done on standard flush-mounting boxes. ","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255447388491,"sku":"RYM1-3611-W210-000","price":328.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RYM-1301__persp_maxi-mL_4c_c8d1e733-8adf-4c56-ae80-f7dc1a1dbc37.png?v=1762925332"},{"product_id":"raumbediengeraet-controller-24-v-rymaskon-rym-1362c-rh-wmod-w-modbus-0-10v-schaltend-schwarz-24-v-ac-dc-rym1-3621-w210-000","title":"RYMASKON® RYM 1362C-RH-WMOD","description":"The room control devices of the Rymaskon® 1000 series are designed for controlling (up to 2 HVAC zones) in residential, hotel and office premises, and individually regulate the heating, cooling and fan stages of the interior. The controller variants can be operated as stand-alone units using the integrated control functions PI, PWM or 2-\/3-point control. The product family is distinguished by its elegant design, intuitive operation and the diverse combination options of the individual components. \u003cbr\u003e The room control devices Rymaskon® 1000 C (controller) are used for controlling and regulating heating fan convectors and fan coil units (fan coils). Depending on the type variant, the devices are available with analog outputs (0 -10 V) as well as with digital\/relay outputs for controlling heating valves, cooling valves, 6-way valves, staged dampers or EC dampers. Control is carried out via PI, PWM or 2-\/3-point control. With the changeover function, 2-pipe and 4-pipe systems can be operated.\u003cbr\u003eThe Modbus communication interface or W-Modbus enables the configuration and monitoring of HVAC parameters on the controller at any time via the BMS. In addition, the functions solar shading (roller shutters, blinds) or lighting (with dimming function) can be controlled over the bus. The optical display is provided via a 2\" TFT display, and operation via capacitive keys (Touchkeys). \u003cbr\u003e \u003cbr\u003eIn addition to the integrated temperature and humidity sensor, CO2 and VOC sensors are optionally available. Furthermore, an input is provided for a passive temperature sensor (NTC10K) and an input for a potential-free contact. This makes it possible, for example, to connect a window contact or a condensation monitor. This ensures that all options are available to flexibly and individually climate-control rooms. \u003cbr\u003eAll device types are available in the timeless Iduna 3 enclosure (112 x 89.5 x 24 mm) in white or black. Wall mounting is performed on standard flush-mounted back boxes. ","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255448076619,"sku":"RYM1-3621-W210-000","price":328.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RYM-1302__persp_maxi-mL_4c_8b59b422-bb99-4807-aad8-508ac2a6168b.png?v=1769692834"},{"product_id":"raumbediengeraet-interface-24-v-rymaskon-rym-1401-rh-wmod-w-modbus-weiss-24-v-ac-dc-rym1-4011-w210-000","title":"RYMASKON® RYM 1401-RH-WMOD","description":"The room controllers of the Rymaskon® 1000 series are designed for controlling (up to 2 HVAC zones) residential, hotel and office rooms, and individually regulate the heating, cooling and fan stages of the interior. The controller variants can be operated as stand-alone devices via the integrated control functions PI, PWM or 2-\/3-point control. The product family is characterized by its elegant design, intuitive operation and the many combination options of the individual components. \u003cbr\u003e \u003cbr\u003eThe room controllers Rymaskon® 1000 (interface) are used to control temperature, fan, solar shading (retractable awnings, blinds) or lighting (with dimming function). The room controllers provide the setpoints either via conventionally wired Modbus or via the wireless, radio-based W-Modbus from the GLT. The visual display is provided via a 2\" TFT display, with operation via capacitive keys (touchkeys).\u003cbr\u003eIn addition to the integrated temperature and humidity sensor, sensors for CO2 and VOC are optionally available. Furthermore, an input is available for a passive temperature sensor (NTC10K) and an input for a potential-free contact. For example, a window contact or a condensation monitor can be connected. This ensures that all options are available to flexibly and individually climate-control the rooms. \u003cbr\u003eAll device types are available in the timeless Iduna 3 enclosure (112 x 89.5 x 24 mm) in white or black. Wall mounting is possible on standard flush-mounting boxes or surface-mounting. ","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255450042699,"sku":"RYM1-4011-W210-000","price":312.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RYM-1401__persp_maxi-mL_4c_bf638b34-4d66-4125-8c2f-5ae5bad84e02.png?v=1762900332"},{"product_id":"raumbediengeraet-interface-24-v-rymaskon-rym-1402-rh-wmod-w-modbus-schwarz-24-v-ac-dc-rym1-4021-w210-000","title":"RYMASKON® RYM 1402-RH-WMOD","description":"The room control units of the Rymaskon® 1000 series are designed for controlling (up to 2 HVAC zones) in residential, hotel, and office rooms, and individually regulate the indoor heating, cooling, and fan stages. The controller variants can be operated as stand-alone devices via the integrated control functions PI, PWM, or 2-\/3-point control. The product family is distinguished by its elegant design, intuitive operation, and the diverse combination possibilities of the individual components. \u003cbr\u003e \u003cbr\u003eThe room control units Rymaskon® 1000 (interface) are used to control temperature, fan, solar shading (roller shutters, blinds), or lighting (with dimming function). The room control units provide setpoints either via conventionally wired Modbus or via the wireless, radio-based W-Modbus of the building management system (GLT). The optical display is implemented using a 2\" TFT display, and operation is via capacitive buttons (Touchkeys).\u003cbr\u003eIn addition to the integrated temperature and humidity sensor, optional sensors for CO2 and VOC are available. Furthermore, an input for a passive temperature sensor (NTC10K) and an input for a potential-free contact are provided. This makes it possible, for example, to connect a window contact or a condensation monitor. This ensures that all options are available to flexibly and individually condition the rooms. \u003cbr\u003eAll device types are available in the timeless housing Iduna 3 (112 x 89.5 x 24 mm) in white or black. Wall mounting is possible on standard flush-mounted boxes or surface-mounted boxes. ","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255450403147,"sku":"RYM1-4021-W210-000","price":312.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RYM-1402__persp_maxi-mL_4c_4ce5f50a-bbba-414a-9af0-b320a200eb23.png?v=1762900367"},{"product_id":"raumbediengeraet-controller-24-v-rymaskon-rym-1431c-rh-wmod-w-modbus-0-10v-weiss-24-v-ac-dc-rym1-4311-w210-000","title":"RYMASKON® RYM 1431C-RH-WMOD","description":"The room operating units of the Rymaskon® 1000 series are designed for controlling (up to 2 heating\/cooling zones) in residential, hotel and office rooms, and individually control the heating, cooling and ventilation stages of the interior. The controller variants can be operated as stand-alone devices using the integrated control functions PI, PWM or 2-\/3-point control. The product family is characterized by its elegant design, intuitive operation and the many combination options of the individual components. \u003cbr\u003e The room operating units Rymaskon® 1000 C (controller) are used for actuating and controlling heating fan convectors and cooling fan convectors (fan-coil). Depending on the type variant, the devices are available with analog outputs (0 -10 V) as well as with digital \/ relay outputs for controlling heating valves, cooling valves, 6-way valves, staged dampers or EC dampers. The actuation is carried out via PI, PWM or 2-\/3-point control. With the changeover function, 2- and 4-pipe systems can be operated.\u003cbr\u003eThe Modbus communication interface or W-Modbus allows changing and monitoring the climate parameters on the controller at any time via the BMS. In addition, functions for solar shading (roller shutters, venetian blinds) or lighting (with dimming function) can be controlled via the bus. The optical indication is provided by a 2\" TFT display; operation is via capacitive buttons (touchkeys). \u003cbr\u003e \u003cbr\u003eIn addition to the integrated temperature and humidity sensor, sensors for CO2 and VOC are available optionally. Furthermore, an input for a passive temperature sensor (NTC10K) and an input for a potential-free contact are provided. This makes it possible, for example, to connect a window contact or a condensation monitor. This ensures all options are available to climate the rooms flexibly and individually. \u003cbr\u003eAll device types are available in the timeless Iduna 3 enclosure (112 x 89.5 x 24 mm) in the colors white or black. Wall mounting is done on standard flush-mounting boxes. ","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255450861899,"sku":"RYM1-4311-W210-000","price":328.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RYM-1401__persp_maxi-mL_4c_b88799a1-3e99-4b38-bce2-7db98773713c.png?v=1762925181"},{"product_id":"raumbediengeraet-controller-24-v-rymaskon-rym-1432c-rh-wmod-w-modbus-0-10v-schwarz-24-v-ac-dc-rym1-4321-w210-000","title":"RYMASKON® RYM 1432C-RH-WMOD","description":"The room control units of the Rymaskon® 1000 series are designed for controlling (up to 2 climate zones) in residential, hotel and office premises and individually regulate the heating, cooling and fan stages of the interior. The controller variants can be operated as stand-alone units using the integrated control functions PI, PWM or 2-\/3-point control. The product family stands out for its elegant design, intuitive operation and the wide range of combination options offered by the individual components. \u003cbr\u003e The room control units Rymaskon® 1000 C (controller) are used to actuate and control heating fan convectors and fan-coil units (fan coil). Depending on the model variant, the devices are available with analog outputs (0 -10 V) as well as with digital\/relay outputs for controlling heating valves, cooling valves, 6-way valves, stepped fans or EC fans. Actuation is performed via PI, PWM or 2-\/3-point control. With the changeover function, 2- and 4-pipe systems can be operated.\u003cbr\u003eThe Modbus communication interface or W-Modbus enables the regulator to change and monitor the climate parameters at any time via the BMS. In addition, functions for solar shading (retractable awnings, roller shutters) or lighting (with dimming function) can be controlled via the bus. Visual indication is provided via a 2\" TFT display, and operation is via capacitive keys (touchkeys). \u003cbr\u003e \u003cbr\u003eIn addition to the integrated temperature and humidity sensor, sensors for CO2 and VOC are available optionally. Furthermore, an input is available for a passive temperature sensor (NTC10K) and an input for a potential-free contact. This makes it possible, for example, to connect a window contact or a condensation monitor. This ensures that all options are available to flexibly and individually climate the rooms. \u003cbr\u003eAll device types are available in the timeless Iduna 3 enclosure (112 x 89.5 x 24 mm) in the colors white or black. Wall mounting is done on standard flush-mounting boxes. ","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255451156811,"sku":"RYM1-4321-W210-000","price":328.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RYM-1402__persp_maxi-mL_4c_2cea1814-336d-4aaa-ac1f-7f4583880442.png?v=1762925225"},{"product_id":"raumbediengeraet-controller-24-v-rymaskon-rym-1462c-rh-wmod-w-modbus-0-10v-schaltend-schwarz-24-v-ac-dc-rym1-4621-w210-000","title":"RYMASKON® RYM 1462C-RH-WMOD","description":"The room control devices of the Rymaskon® 1000 series are designed for controlling (up to 2 air-conditioning zones) in residential, hotel and office rooms, and individually regulate the heating, cooling and fan stages of the interior space. The controller variants can be operated as stand-alone devices thanks to the integrated control functions PI, PWM or 2-\/3-point control. The product family is characterized by its elegant design, intuitive operation and the wide range of combination options of the individual components. \u003cbr\u003e The room control devices Rymaskon® 1000 C (controllers) are used for controlling and regulating heating fan convectors and fan coil units (FCU). Depending on the type variant, the devices are available with analog outputs (0 -10 V) as well as with digital\/relay outputs for controlling heating valves, cooling valves, 6-way valves, stepped fans or EC fans. Control is performed via PI, PWM or 2-\/3-point control. With the changeover function, 2- and 4-pipe systems can be operated.\u003cbr\u003eThe Modbus communication interface or W-Modbus makes it possible at any time to change and monitor the HVAC parameters on the controller via the BMS. In addition, the functions for solar shading (roll-down shutters, blinds) or lighting (with dimming function) can be controlled over the bus. The optical display is provided by a 2\" TFT display; operation is via capacitive buttons (touchkeys). \u003cbr\u003e \u003cbr\u003eIn addition to the integrated temperature and humidity sensor, optional sensors for CO2 and VOC are available. Furthermore, an input for a passive temperature sensor (NTC10K) and an input for a potential-free contact are available. This makes it possible, for example, to connect a window contact or a condensation monitor. This ensures that all options are available to climate-control rooms flexibly and individually. \u003cbr\u003eAll device types are available in the timeless Iduna 3 enclosure (112 x 89.5 x 24 mm) in the colors White or Black. Wall mounting is done on standard flush-mounting boxes. ","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255452041547,"sku":"RYM1-4621-W210-000","price":328.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RYM-1402__persp_maxi-mL_4c_a5046b4a-4102-46a0-b9a2-589ebea94d4b.png?v=1762925255"},{"product_id":"raumbediengeraet-interface-24-v-rymaskon-rym-1301-rh-wmod-w-modbus-weiss-24-v-ac-dc-rym1-3011-w210-000","title":"RYMASKON® RYM 1301-RH-WMOD","description":"Room controller devices of the Rymaskon® 1000 series are designed for controlling (up to 2 HVAC zones) in residential, hotel and office rooms, and individually regulate the indoor heating, cooling and fan stages. The controller variants can be operated as stand-alone devices using the integrated control functions PI, PWM or 2-\/3-point control. The product family stands out for its elegant design, intuitive operation and the many combination options of the individual components. \u003cbr\u003e \u003cbr\u003eThe room controller devices Rymaskon® 1000 (interface) are used to control temperature, fan, sun protection (retractable awnings, blinds) or lighting (with dimming function). The room controller devices provide the setpoints either via conventionally wired Modbus or via the wireless, radio-based W-Modbus from the BMS\/BACS. The optical display is provided via a 2\" TFT display; operation is via capacitive keys (Touchkeys).\u003cbr\u003eIn addition to the integrated temperature and humidity sensor, optional sensors for CO2 and VOC are available. Furthermore, an input for a passive temperature sensor (NTC10K) and an input for a potential-free contact are provided. This means, for example, that a window contact or a condensation monitor can be connected. This ensures that all options are available to flexibly and individually climate-control the rooms. \u003cbr\u003eAll device types are available in the timeless Iduna 3 enclosure (112 x 89.5 x 24 mm) in the colors white or black. Wall mounting is possible on standard flush-mount boxes or surface-mount boxes. ","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255491821899,"sku":"RYM1-3011-W210-000","price":312.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RYM-1301__persp_maxi-mL_4c_1cb199c5-20af-487b-9f27-8230d7f034cf.png?v=1762908274"},{"product_id":"raumbediengeraet-interface-24-v-rymaskon-rym-1302-rh-wmod-w-modbus-schwarz-24-v-ac-dc-rym1-3021-w210-000","title":"RYMASKON® RYM 1302-RH-WMOD","description":"The room control devices of the Rymaskon® 1000 series are designed to control (up to 2 HVAC zones) in residential, hotel and office rooms and individually regulate the heating, cooling and fan stages of the indoor space. The controller variants can be operated as stand-alone devices using the integrated control functions PI, PWM or 2-\/3-point control. The product family stands out for its elegant design, intuitive operation and the versatile combination options of the individual components. \u003cbr\u003e \u003cbr\u003eThe room control devices Rymaskon® 1000 (interface) are used to control temperature, fan, solar shading (roller shutters, blinds) or lighting (with dimming function). The room control devices provide the setpoints either via conventionally wired Modbus or via the wireless, radio-based W-Modbus of the BMS\/GLT. The optical display is implemented via a 2\" TFT display, and operation is via capacitive keys (touchkeys).\u003cbr\u003eIn addition to the integrated temperature and humidity sensor, optional sensors for CO2 and VOC are available. Furthermore, an input is provided for a passive temperature sensor (NTC10K) and an input is provided for a potential-free contact. This enables, for example, a window contact or a condensation monitor to be connected. This means all options are available to flexibly and individually climatize rooms. \u003cbr\u003eAll device types are available in the timeless Iduna 3 enclosure (112 x 89.5 x 24 mm) in the colors white or black. Wall mounting is possible on standard flush-mount junction boxes or surface-mount. ","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255509287243,"sku":"RYM1-3021-W210-000","price":312.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RYM-1302__persp_maxi-mL_4c_ff1b54f1-9abf-4807-8328-425821a2461b.png?v=1762910931"},{"product_id":"raumbediengeraet-controller-230-v-rymaskon-rym-1311c-rh-wmod-w-modbus-0-10v-schaltend-weiss-230-v-ac-rym1-3111-w220-000","title":"RYMASKON® RYM 1311C-RH-WMOD","description":"The room control devices of the Rymaskon® 1000 series are designed to control (up to 2 HVAC zones) in residential, hotel and office rooms and individually regulate the heating, cooling and fan stages of the indoor area. The controller variants can be operated as stand-alone devices via the integrated control functions PI, PWM or 2-\/3-point control. The product family is distinguished by its elegant design, intuitive operation and the many combination options of the individual components. \u003cbr\u003e The room control devices Rymaskon® 1000 C (controller) are used for controlling and regulating heating fan convectors and fan coil units (fancoil). Depending on the type variant, the units are available with analog outputs (0 -10 V) as well as with digital-\/relay outputs for controlling heating valves, cooling valves, 6-way valves, staged dampers or EC dampers. The control is performed via PI, PWM or 2-\/3-point control. With the changeover function, 2- and 4-pipe systems can be operated. \u003cbr\u003e The Modbus communication interface or W-Modbus enables the continuous change and monitoring of climate parameters on the controller via the BMS. In addition, the functions for solar protection (roller shutters, blinds) or lighting (with dimming function) can be controlled over the bus. The optical display is provided via a 2\" TFT display, and operation via capacitive keys (touchkeys). \u003cbr\u003e \u003cbr\u003e In addition to the integrated temperature and humidity sensor, sensors for CO2 and VOC are available optionally. Furthermore, an input for a passive temperature sensor (NTC10K) and an input for a potential-free contact are available. This makes it possible, for example, to connect a window contact or a condensation monitor. This provides all the options needed to climate-control rooms flexibly and individually. \u003cbr\u003e All device types are available in the timeless Iduna 3 enclosure (112 x 89.5 x 24 mm) in the colors white or black. Wall mounting is performed on standard flush-mount boxes. ","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255542120779,"sku":"RYM1-3111-W220-000","price":328.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RYM-1301__persp_maxi-mL_4c_06031f12-9223-46cc-a71c-cb5f4523af07.png?v=1769690868"},{"product_id":"raumbediengeraet-controller-230-v-rymaskon-rym-1311c-rh-wmod-b-w-modbus-0-10v-schaltend-weiss-230-v-ac-rym1-3111-w220-001","title":"RYMASKON® RYM 1311C-RH-WMOD-B","description":"The room controllers of the series Rymaskon® 1000 are designed to control (up to 2 HVAC zones) in residential, hotel and office rooms and individually regulate the heating, cooling and fan stages of the interior space. The controller variants can be operated as stand-alone devices using the integrated control functions PI, PWM or 2-\/3-point control. The product family is characterized by its elegant design, intuitive operation and the many combination options of the individual components. \u003cbr\u003e The room controllers Rymaskon® 1000 C (controller) are used to actuate and control heating fan coil units and blow-through fan coil units (fancoils). Depending on the type variant, the devices are available with analog outputs (0 -10 V) as well as with digital \/ relay outputs, for actuating heating valves, cooling valves, 6-way valves, step-controlled fans or EC fans. The actuation is carried out via PI, PWM or 2-\/3-point control. With the changeover function, 2-pipe and 4-pipe systems can be operated. \u003cbr\u003e The Modbus communication interface or W-Modbus makes it possible at any time to change and monitor the HVAC parameters on the controller via the BMS. In addition, the functions solar protection (roller shutters, blinds) or lighting (with dimming function) can be controlled over the bus. Optical indication is provided via a 2\" TFT display, and operation via capacitive keys (touchkeys). \u003cbr\u003e \u003cbr\u003e In addition to the integrated temperature and humidity sensor, sensors for CO2 and VOC are available as options. Furthermore, an input is provided for a passive temperature sensor (NTC10K) and an input for a potential-free contact. This allows, for example, a window contact or a condensation monitor to be connected. This provides all possibilities to flexibly and individually condition the rooms. \u003cbr\u003e All device types are available in the timeless housing Iduna 3 (112 x 89.5 x 24 mm) in white or black. Wall mounting is done on standard flush-mounted back boxes. ","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255543628107,"sku":"RYM1-3111-W220-001","price":392.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RYM-1301-B___persp_maxi-mL_4c_4040dc8c-4c9e-4396-bf05-e8f199fcd26a.png?v=1769690678"},{"product_id":"raumbediengeraet-controller-230-v-rymaskon-rym-1311c-rh-wmod-bb-w-modbus-0-10v-schaltend-weiss-230-v-ac-rym1-3111-w220-002","title":"RYMASKON® RYM 1311C-RH-WMOD-BB","description":"The room control devices of the Rymaskon® 1000 series are designed for controlling (up to 2 zones) in residential, hotel, and office spaces and individually regulate the heating, cooling, and fan stages of the indoor unit. The controller variants can be operated as stand-alone devices via the integrated control functions PI, PWM, or 2-\/3-point control. The product family is characterized by its elegant design, intuitive operation, and the many combination options of the individual components. \u003cbr\u003e The room control devices Rymaskon® 1000 C (controllers) are used to control and regulate hot-water fan coil units and fan coil units (fan coil). Depending on the type variant, the devices are available with analog outputs (0 -10 V) as well as with digital\/relay outputs for controlling heating valves, cooling valves, 6-way valves, staged fans, or EC fans. Control is carried out via PI, PWM, or 2-\/3-point control. With the changeover function, 2-pipe and 4-pipe systems can be operated.\u003cbr\u003eThe Modbus communication interface or W-Modbus makes it possible at any time to change and monitor the HVAC parameters on the controller via the building management system (GLT). In addition, functions such as solar shading (roller shutters, blinds) or lighting (with dimming function) can be controlled via the bus. The optical display is provided via a 2\" TFT display, and operation via capacitive buttons (touchkeys). \u003cbr\u003e \u003cbr\u003eIn addition to the integrated temperature and humidity sensor, sensors for CO2 and VOC are available as options. Furthermore, an input is provided for a passive temperature sensor (NTC10K) and an input for a potential-free contact. This makes it possible, for example, to connect a window contact or a condensation monitor. This ensures that all options are available to flexibly and individually climate-control the rooms. \u003cbr\u003e All device types are available in the timeless Iduna 3 enclosure (112 x 89.5 x 24 mm) in the colors white or black. Wall mounting is done on standard flush-mount wall boxes. ","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255544938827,"sku":"RYM1-3111-W220-002","price":392.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RYM-1301-BB__persp_maxi-mL_4c_1975d3c2-2b8d-4716-8234-ed247e19b47e.png?v=1769690717"},{"product_id":"raumbediengeraet-controller-230-v-rymaskon-rym-1311c-rh-wmod-l-w-modbus-0-10v-schaltend-weiss-230-v-ac-rym1-3111-w220-003","title":"RYMASKON® RYM 1311C-RH-WMOD-L","description":"The room control units of the Rymaskon® 1000 series are designed for controlling (up to 2 HVAC zones) in residential, hotel, and office premises, and individually regulate the heating, cooling, and fan stages of the indoor space. The controller variants can be operated as stand-alone units using the integrated control functions PI, PWM, or 2-\/3-point control. The product family is distinguished by its elegant design, intuitive operation, and the many combination options of the individual components. \u003cbr\u003e The room control units Rymaskon® 1000 C (controllers) are used for controlling and regulating heating fan convectors and blower convectors (fan coil). Depending on the type variant, the units are available with analog outputs (0 -10 V) as well as with digital\/relay outputs, for controlling heating valves, cooling valves, 6-way valves, step-controlled fans, or EC fans. The control is carried out via PI, PWM, or 2-\/3-point control. With the changeover function, 2-pipe and 4-pipe systems can be operated.\u003cbr\u003eThe Modbus communication interface or W-Modbus enables the HVAC parameters to be changed and monitored on the controller at any time via the BMS. In addition, functions for solar shading (roller shutters, blinds) or lighting (with dimming function) can also be controlled over the bus. The optical display is provided via a 2\" TFT display, and operation is via capacitive keys (touchkeys). \u003cbr\u003e \u003cbr\u003eIn addition to the integrated temperature and humidity sensor, optional sensors for CO2 and VOC are available. Furthermore, an input for a passive temperature sensor (NTC10K) and an input for a potential-free contact are available. For example, a window contact or a condensation warning device can be connected. This ensures that all options are available to flexibly and individually climate-control the rooms. \u003cbr\u003eAll device types are available in the timeless Iduna 3 enclosure (112 x 89.5 x 24 mm) in the colors white or black. Wall mounting is done on standard flush-mount wall boxes. ","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255548019019,"sku":"RYM1-3111-W220-003","price":392.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RYM-1301-L___persp_maxi-mL_4c_28529816-094b-4d40-8983-dab41d3b5efd.png?v=1769690793"}],"url":"https:\/\/www.spluss.es\/en\/collections\/temperature-sensors-wireless-modbus.oembed?page=11","provider":"S+S Regeltechnik","version":"1.0","type":"link"}