{"title":"Sale","description":"","products":[{"product_id":"anlegetemperaturfuehler-thermasgard-altm1-modbus-sd-modbus-rtu-kabelverschraubung-1101-6246-0000-000","title":"THERMASGARD® ALTM1-Modbus-SD","description":"Calibratable contact temperature measuring transducer (compact version) THERMASGARD® ALTM1 - Modbus-SD, with Modbus connection (Y adapter), in an impact-resistant plastic housing with quick-locking screws, pipe feeder, incl. clamping strap, optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe pipe contact sensor is used to measure the temperature on cables, pipes (e.g. cold and hot water) or on heating pipes for heating control. Modbus sensor SD with RS485 Modbus interface (not galvanically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254845505867,"sku":"1101-6246-0000-000","price":114.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTM-1-Modbus__tyr1-Y_maxi-mL_4c_388c42f9-4903-401a-9058-681f2b35a78d.png?v=1769646997"},{"product_id":"anlegetemperaturfuehler-thermasgard-altm1-modbus-sd-lcd-modbus-rtu-kabelverschraubung-1101-6246-2000-000","title":"THERMASGARD® ALTM1-Modbus-SD LCD","description":"Calibratable contact temperature measuring transducer (compact version) THERMASGARD® ALTM1 - Modbus-SD, with Modbus connection (Y adapter), in an impact-resistant plastic housing with quick-locking screws, pipe feeder, incl. clamping strap, optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe pipe contact sensor is used to measure the temperature on cables, pipes (e.g. cold and hot water) or on heating pipes for heating control. Modbus sensor SD with RS485 Modbus interface (not galvanically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254846521675,"sku":"1101-6246-2000-000","price":160.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTM-1-Modbus-Display__tyr1-Y_maxi-mL_4c_e426df14-a938-4feb-943b-61ea838fb758.png?v=1769646985"},{"product_id":"aussentemperaturfuehler-thermasgard-atm2-modbus-sd-ip65-modbus-rtu-kabelverschraubung-1101-1296-0000-000","title":"THERMASGARD® ATM2-Modbus-SD","description":"Calibratable outdoor temperature measuring transducer THERMASGARD® ATM 2 - Modbus-SD, with Modbus connection (Y adapter), in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, measures temperature (-50...+150 °C). The surface-mounted sensor is used to measure the temperature in gaseous media. It is used outdoors or in damp rooms, in cold stores and greenhouses, in industry and in agriculture. \u003cbr\u003e\u003cbr\u003eInstallation on external walls is preferably on the north side or in a protected location. In direct sunlight, the WS 01 or WS 04 sun and ball protection (accessories) or the SS 02 device variant with mounted sun protection (on request) must be used. Modbus sensor SD with RS485 Modbus interface (not electrically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254865527115,"sku":"1101-1296-0000-000","price":110.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ATM-2-Modbus__tyr1-Y_maxi-mL_4c_a44fa73d-edc0-4663-b7d4-5870eeb7116c.png?v=1769653233"},{"product_id":"aussentemperaturfuehler-thermasgard-atm2-modbus-sd-lcd-ip65-modbus-rtu-kabelverschraubung-1101-1296-2000-000","title":"THERMASGARD® ATM2-Modbus-SD LCD","description":"Calibratable outdoor temperature measuring transducer THERMASGARD® ATM 2 - Modbus-SD, with Modbus connection (Y adapter), in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, measures temperature (-50...+150 °C). The surface-mounted sensor is used to measure the temperature in gaseous media. It is used outdoors or in damp rooms, in cold stores and greenhouses, in industry and in agriculture. \u003cbr\u003e\u003cbr\u003eInstallation on external walls is preferably on the north side or in a protected location. In direct sunlight, the WS 01 or WS 04 sun and ball protection (accessories) or the SS 02 device variant with mounted sun protection (on request) must be used. Modbus sensor SD with RS485 Modbus interface (not electrically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254866313547,"sku":"1101-1296-2000-000","price":155.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ATM-2-Modbus-Display__tyr1-Y_maxi-mL_4c_9b19d8ae-0283-4c6e-bb05-e56d66c89ce6.png?v=1769653258"},{"product_id":"anlegetemperaturfuehler-thermasgard-altm2-modbus-sd-ip65-modbus-rtu-kabelverschraubung-1101-6256-0210-120","title":"THERMASGARD® ALTM2-Modbus-SD","description":"Calibratable contact temperature measuring transducer (remote version) THERMASGARD® ALTM2 - Modbus-SD, with Modbus connection (Y adapter), in an impact-resistant plastic housing with quick-locking screws, cable sensor with pipe contact, incl. tensioning strap, optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe pipe contact sensor is used to measure the temperature on cables, pipes (e.g. cold and hot water) or on heating pipes for heating control. Modbus sensor SD with RS485 Modbus interface (not galvanically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254870376779,"sku":"1101-6256-0210-120","price":120.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTM-2-Modbus__tyr1-Y_maxi-mL_4c_d5acb5ef-6d6f-4654-bedf-bf0262b86c82.png?v=1769647050"},{"product_id":"anlegetemperaturfuehler-thermasgard-altm2-modbus-sd-lcd-ip65-modbus-rtu-kabelverschraubung-1101-6256-2210-120","title":"THERMASGARD® ALTM2-Modbus-SD LCD","description":"Calibratable contact temperature measuring transducer (remote version) THERMASGARD® ALTM2 - Modbus-SD, with Modbus connection (Y adapter), in an impact-resistant plastic housing with quick-locking screws, cable sensor with pipe contact, incl. tensioning strap, optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe pipe contact sensor is used to measure the temperature on cables, pipes (e.g. cold and hot water) or on heating pipes for heating control. Modbus sensor SD with RS485 Modbus interface (not galvanically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254870802763,"sku":"1101-6256-2210-120","price":165.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTM-2-Modbus-Display__tyr1-Y_maxi-mL_4c_58e9dea5-d8bb-49ae-a212-01dbc7687199.png?v=1769647077"},{"product_id":"huelsenfuehler-mit-temperaturmessumformer-thermasgard-hftm-modbus-sd-ip65-modbus-rtu-kabelverschraubung-1101-6266-0210-120","title":"THERMASGARD® HFTM-Modbus-SD","description":"Calibratable sleeve temperature measuring transducer THERMASGARD® HFTM - Modbus-SD, with Modbus connection (Y adapter), in impact-resistant plastic housing with quick-locking screws, cable sensor with stainless steel sleeve, optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe sleeve sensor is used to measure the temperature in liquid and gaseous media. It can be used as a duct sensor or by installing it in immersion sleeve THE (accessory) as an immersion and screw-in sensor in liquids. Modbus sensor SD with RS485 Modbus interface (not galvanically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254905766219,"sku":"1101-6266-0210-120","price":113.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HFTM-Modbus__tyr1-Y_maxi-mL_4c_646ac003-419b-4ea9-aae3-26ff26a5dd6d.png?v=1769678483"},{"product_id":"huelsenfuehler-mit-temperaturmessumformer-thermasgard-hftm-modbus-sd-lcd-ip65-modbus-rtu-kabelverschraubung-1101-6266-2210-120","title":"THERMASGARD® HFTM-Modbus-SD LCD","description":"Calibratable sleeve temperature measuring transducer THERMASGARD® HFTM - Modbus-SD, with Modbus connection (Y adapter), in impact-resistant plastic housing with quick-locking screws, cable sensor with stainless steel sleeve, optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe sleeve sensor is used to measure the temperature in liquid and gaseous media. It can be used as a duct sensor or by installing it in immersion sleeve THE (accessory) as an immersion and screw-in sensor in liquids. Modbus sensor SD with RS485 Modbus interface (not galvanically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). Sensor breakage or sensor short circuit are detected as faults by means of self-diagnostics. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254906618187,"sku":"1101-6266-2210-120","price":158.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HFTM-Modbus-Display__tyr1-Y_maxi-mL_4c_ae157b49-9ad7-48fb-bd9f-41d66a162f62.png?v=1769678511"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-modbus-sd-3-0m-ip65-modbus-rtu-kabelverschraubung-1101-3286-0230-000","title":"THERMASGARD® MWTM-Modbus-SD 3.0m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus-SD, with Modbus connection (Y adapter), in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (3.0 m\/ 6.0 m, fully active) in protective tube made of reinforced thermoplastic hose and anti-kink spring, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (laid in a meandering pattern, it measures the temperature evenly). MK-05-M mounting brackets (accessories) are available for professional installation of the rod. Modbus sensor SD with RS485 Modbus interface (not electrically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254970319179,"sku":"1101-3286-0230-000","price":217.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Modbus__tyr1-Y_maxi-mL_4c_8f49afa8-fdfe-4b8b-b923-213646fbe563.png?v=1769687521"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-modbus-sd-6-0m-ip65-modbus-rtu-kabelverschraubung-1101-3286-0260-000","title":"THERMASGARD® MWTM-Modbus-SD 6.0m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus-SD, with Modbus connection (Y adapter), in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (3.0 m\/ 6.0 m, fully active) in protective tube made of reinforced thermoplastic hose and anti-kink spring, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (laid in a meandering pattern, it measures the temperature evenly). Mounting brackets MK-05-M (accessories) are available for professional installation of the rod. Modbus sensor SD with RS485 Modbus interface (not electrically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254970712395,"sku":"1101-3286-0260-000","price":269.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Modbus__tyr1-Y_maxi-mL_4c_5bcb1079-12aa-4696-ab94-6ef123be7d9e.png?v=1769687565"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-modbus-sd-3-0m-lcd-ip65-modbus-rtu-kabelverschraubung-1101-3286-2230-000","title":"THERMASGARD® MWTM-Modbus-SD 3.0m LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus-SD, with Modbus connection (Y adapter), in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (3.0 m\/ 6.0 m, fully active) in protective tube made of reinforced thermoplastic hose and anti-kink spring, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air conditioning ducts over the entire cross-section or over a defined length (laid in a meandering pattern, it measures the temperature evenly). MK-05-M mounting clips (accessories) are available for professional installation of the rod. Modbus sensor SD with RS485 Modbus interface (not galvanically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). Sensor breakage or sensor short circuit are detected as faults by means of self-diagnostics. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254971072843,"sku":"1101-3286-2230-000","price":261.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Modbus-Display__tyr1-Y_maxi-mL_4c_c94cd7f2-bbf5-4880-ad6b-a6e042b78d68.png?v=1769687552"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-modbus-sd-6-0m-lcd-ip65-modbus-rtu-kabelverschraubung-1101-3286-2260-000","title":"THERMASGARD® MWTM-Modbus-SD 6.0m LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus-SD, with Modbus connection (Y adapter), in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (3.0 m\/ 6.0 m, fully active) in protective tube made of reinforced thermoplastic hose and anti-kink spring, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air conditioning ducts over the entire cross-section or over a defined length (laid in a meandering pattern, it measures the temperature evenly). MK-05-M mounting brackets (accessories) are available for professional installation of the rod. Modbus sensor SD with RS485 Modbus interface (not electrically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254971400523,"sku":"1101-3286-2260-000","price":314.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Modbus-Display__tyr1-Y_maxi-mL_4c_a6018caf-abef-4643-8b9f-dc83480e86f8.png?v=1769687595"},{"product_id":"tauchtemperaturmessumformer-thermasgard-tm65-modbus-sd-100mm-ip65-modbus-rtu-kabelverschraubung-1101-7286-0020-000","title":"THERMASGARD® TM65-Modbus-SD 100mm","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus-SD, with Modbus connection (Y adapter), in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (100 - 200 mm), optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media. Stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circulation systems, in mechanical and plant engineering and in the entire industrial sector. Modbus sensor SD with RS485 Modbus interface (not galvanically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). Sensor breakage or sensor short circuit are detected as faults by means of self-diagnostics. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255103816011,"sku":"1101-7286-0020-000","price":110.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-Modbus__tyr1-Y_maxi-mL_4c_6abfddcb-65ff-4aa0-b24c-2aad87016f75.png?v=1762962426"},{"product_id":"tauchtemperaturmessumformer-thermasgard-tm65-modbus-sd-150mm-ip65-modbus-rtu-kabelverschraubung-1101-7286-0030-000","title":"THERMASGARD® TM65-Modbus-SD 150mm","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus-SD, with Modbus connection (Y adapter), in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (100 - 200 mm), optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media. The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circulation systems, in mechanical and plant engineering and in the entire industrial sector. Modbus sensor SD with RS485 Modbus interface (not galvanically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255103979851,"sku":"1101-7286-0030-000","price":110.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-Modbus__tyr1-Y_maxi-mL_4c_0ffb9bfc-a9b9-45cd-b124-41c852920c27.png?v=1762962535"},{"product_id":"tauchtemperaturmessumformer-thermasgard-tm65-modbus-sd-200mm-ip65-modbus-rtu-kabelverschraubung-1101-7286-0040-000","title":"THERMASGARD® TM65-Modbus-SD 200mm","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus-SD, with Modbus connection (Y adapter), in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (100 - 200 mm), optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media. The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circulation systems, in mechanical and plant engineering and in the entire industrial sector. Modbus sensor SD with RS485 Modbus interface (not galvanically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255104143691,"sku":"1101-7286-0040-000","price":110.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-Modbus__tyr1-Y_maxi-mL_4c_d5a236af-6d64-4140-acdd-bc206b2738c4.png?v=1762962645"},{"product_id":"tauchtemperaturmessumformer-thermasgard-tm65-modbus-sd-100mm-lcd-ip65-modbus-rtu-kabelverschraubung-1101-7286-2020-000","title":"THERMASGARD® TM65-Modbus-SD 100mm LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus-SD, with Modbus connection (Y adapter), in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (100 - 200 mm), optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media. The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circulation systems, in mechanical and plant engineering and in the entire industrial sector. Modbus sensor SD with RS485 Modbus interface (not galvanically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). Sensor breakage or sensor short circuit are detected as faults by means of self-diagnostics. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255105192267,"sku":"1101-7286-2020-000","price":154.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-Modbus-Display__tyr1-Y_maxi-mL_4c_7da66a8f-b7b2-4d2a-9f30-47b59bfb7495.png?v=1762962485"},{"product_id":"tauchtemperaturmessumformer-thermasgard-tm65-modbus-sd-150mm-lcd-ip65-modbus-rtu-kabelverschraubung-1101-7286-2030-000","title":"THERMASGARD® TM65-Modbus-SD 150mm LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus-SD, with Modbus connection (Y adapter), in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (100 - 200 mm), optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media. The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circulation systems, in mechanical and plant engineering and in the entire industrial sector. Modbus sensor SD with RS485 Modbus interface (not galvanically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255105323339,"sku":"1101-7286-2030-000","price":155.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-Modbus-Display__tyr1-Y_maxi-mL_4c_2587bc73-2777-4cd2-87c5-2e6415d1a2ca.png?v=1762962595"},{"product_id":"tauchtemperaturmessumformer-thermasgard-tm65-modbus-sd-200mm-lcd-ip65-modbus-rtu-kabelverschraubung-1101-7286-2040-000","title":"THERMASGARD® TM65-Modbus-SD 200mm LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus-SD, with Modbus connection (Y adapter), in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (100 - 200 mm), optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media. The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circulation systems, in mechanical and plant engineering and in the entire industrial sector. Modbus sensor SD with RS485 Modbus interface (not galvanically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). Sensor breakage or sensor short circuit are detected as faults by means of self-diagnostics. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255105454411,"sku":"1101-7286-2040-000","price":155.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-Modbus-Display__tyr1-Y_maxi-mL_4c_de077a5f-c1b5-46c4-a304-215a49129c6a.png?v=1762962705"},{"product_id":"frostschutzthermostat-thermasreg-fst-1d-temperaturwaechter-selbststaendig-schaltend-6-0-m-1102-1021-0100-000","title":"THERMASREG® FST-1D","description":"Mechanical frost protection thermostat\/frost monitor THERMASREG® FST with switching output, fully active sensor rod, automatic reset or mechanical interlock with manual reset, available in capillary lengths of 0.6 m, 1.8 m, 3 m, 6 m, 12 m.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The frost protection monitor is suitable for air or water-side temperature monitoring of heat exchangers, water circulation systems and heating registers against freezing and for preventing frost damage, e.g. in ventilation and air conditioning ducts. It is intrinsically safe, with sensor break detection. If the capillary tube diaphragm system is damaged, the frost sensor automatically switches to the heating function. The FST 3 is also suitable for monitoring liquids. The sensor tube can be installed in an immersion sleeve. The delivery includes mounting clamps MK-05-K.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255139991883,"sku":"1102-1021-0100-000","price":33.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/FST-1__thor2_mini_4c.png?v=1769675124"},{"product_id":"frostschutzthermostat-thermasreg-fst-3d-temperaturwaechter-selbststaendig-schaltend-1-8-m-1102-1023-0100-000","title":"THERMASREG® FST-3D","description":"Mechanical frost protection thermostat\/frost monitor THERMASREG® FST with switching output, fully active sensor rod, automatic reset or mechanical interlock with manual reset, available in capillary lengths of 0.6 m, 1.8 m, 3 m, 6 m, 12 m.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The frost protection monitor is suitable for air or water-side temperature monitoring of heat exchangers, water circulation systems and heating registers against freezing and for preventing frost damage, e.g. in ventilation and air conditioning ducts. It is intrinsically safe, with sensor break detection. If the capillary tube membrane system is damaged, the frost sensor automatically switches to the heating function. The FST 3 is also suitable for monitoring liquids. The sensor tube can be installed in an immersion sleeve. The delivery includes mounting clamps MK-05-K.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255140188491,"sku":"1102-1023-0100-000","price":29.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/FST-3__thor2_mini_4c.png?v=1769675200"},{"product_id":"frostschutzthermostat-thermasreg-fst-7d-temperaturwaechter-selbststaendig-schaltend-12-0-m-1102-1025-0100-000","title":"THERMASREG® FST-7D","description":"Mechanical frost protection thermostat\/frost monitor THERMASREG® FST with switching output, fully active sensor rod, automatic reset or mechanical interlock with manual reset, available in capillary lengths of 0.6 m, 1.8 m, 3 m, 6 m, 12 m.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The frost protection monitor is suitable for air or water-side temperature monitoring of heat exchangers, water circulation systems and heating registers against freezing and for preventing frost damage, e.g. in ventilation and air conditioning ducts. It is intrinsically safe, with sensor break detection. If the capillary tube diaphragm system is damaged, the frost sensor automatically switches to the heating function. The FST 3 is also suitable for monitoring liquids. The sensor tube can be installed in an immersion sleeve. The delivery includes mounting clamps MK-05-K.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255140286795,"sku":"1102-1025-0100-000","price":50.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/FST-1__thor2_mini_4c_ab7a596b-1229-45e3-a8a2-82e859207d77.png?v=1769675340"},{"product_id":"frostschutzthermostat-thermasreg-fst-1d-hr-temperaturbegrenzer-mit-handrueckstellung-6-0-m-1102-1021-1100-000","title":"THERMASREG® FST-1D-HR","description":"Mechanical frost protection thermostat\/frost monitor THERMASREG® FST with switching output, fully active sensor rod, automatic reset or mechanical interlock with manual reset, available in capillary lengths of 0.6 m, 1.8 m, 3 m, 6 m, 12 m. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe frost protection monitor is suitable for air or water-side temperature monitoring of heat exchangers, water circulation systems and heating registers against freezing and for preventing frost damage, e.g. in ventilation and air conditioning ducts. It is intrinsically safe, with sensor break detection. If the capillary tube diaphragm system is damaged, the frost sensor automatically switches to the heating function. The FST 3 is also suitable for monitoring liquids. The sensor tube can be installed in an immersion sleeve. Delivery includes mounting clamps MK-05-K.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255140581707,"sku":"1102-1021-1100-000","price":37.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/FST-1-R__thor2_mini_4c.png?v=1769675086"},{"product_id":"frostschutzthermostat-thermasreg-fst-5d-hr-temperaturbegrenzer-mit-handrueckstellung-3-0-m-1102-1022-1100-000","title":"THERMASREG® FST-5D-HR","description":"Mechanical frost protection thermostat\/frost monitor THERMASREG® FST with switching output, fully active sensor rod, automatic reset or mechanical interlock with manual reset, available in capillary lengths of 0.6 m, 1.8 m, 3 m, 6 m, 12 m. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe frost protection monitor is suitable for air or water-side temperature monitoring of heat exchangers, water circulation systems and heating registers against freezing and for preventing frost damage, e.g. in ventilation and air conditioning ducts. It is intrinsically safe, with sensor break detection. If the capillary tube diaphragm system is damaged, the frost sensor automatically switches to the heating function. The FST 3 is also suitable for monitoring liquids. The sensor tube can be installed in an immersion sleeve. The delivery includes mounting clamps MK-05-K.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255140680011,"sku":"1102-1022-1100-000","price":33.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/FST-1-R__thor2_mini_4c_cb339249-b1e9-4639-b41d-68b99f5f2084.png?v=1769675238"},{"product_id":"frostschutzthermostat-thermasreg-fst-3d-hr-temperaturbegrenzer-mit-handrueckstellung-1-8-m-1102-1023-1100-000","title":"THERMASREG® FST-3D-HR","description":"Mechanical frost protection thermostat\/frost monitor THERMASREG® FST with switching output, fully active sensor rod, automatic reset or mechanical interlock with manual reset, available in capillary lengths of 0.6 m, 1.8 m, 3 m, 6 m, 12 m. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe frost protection monitor is suitable for air or water-side temperature monitoring of heat exchangers, water circulation systems and heating registers against freezing and for preventing frost damage, e.g. in ventilation and air conditioning ducts. It is intrinsically safe, with sensor break detection. If the capillary tube diaphragm system is damaged, the frost sensor automatically switches to the heating function. The FST 3 is also suitable for monitoring liquids. The sensor tube can be installed in an immersion sleeve. Delivery includes mounting clamps MK-05-K.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255140843851,"sku":"1102-1023-1100-000","price":34.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/FST-3-R__thor2_mini_4c.png?v=1769675163"},{"product_id":"frostschutzthermostat-thermasreg-fst-8d-hr-temperaturbegrenzer-mit-handrueckstellung-0-6-m-1102-1024-1100-000","title":"THERMASREG® FST-8D-HR","description":"Mechanical frost protection thermostat\/frost monitor THERMASREG® FST with switching output, fully active sensor rod, automatic reset or mechanical interlock with manual reset, available in capillary lengths of 0.6 m, 1.8 m, 3 m, 6 m, 12 m. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe frost protection monitor is suitable for air or water-side temperature monitoring of heat exchangers, water circulation systems and heating registers against freezing and for preventing frost damage, e.g. in ventilation and air conditioning ducts. It is intrinsically safe, with sensor break detection. If the capillary tube membrane system is damaged, the frost sensor automatically switches to the heating function. The FST 3 is also suitable for monitoring liquids. The sensor tube can be installed in an immersion sleeve. The delivery includes mounting clamps MK-05-K.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255141105995,"sku":"1102-1024-1100-000","price":33.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/FST-1-R__thor2_mini_4c_646ace93-4b81-4251-83e0-b3d8c5957a67.png?v=1769675377"},{"product_id":"frostschutzthermostat-thermasreg-fst-7d-hr-temperaturbegrenzer-mit-handrueckstellung-12-0-m-1102-1025-1100-000","title":"THERMASREG® FST-7D-HR","description":"Mechanical frost protection thermostat\/frost monitor THERMASREG® FST with switching output, fully active sensor rod, automatic reset or mechanical interlock with manual reset, available in capillary lengths of 0.6 m, 1.8 m, 3 m, 6 m, 12 m. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe frost protection monitor is suitable for air or water-side temperature monitoring of heat exchangers, water circulation systems and heating registers against freezing and for preventing frost damage, e.g. in ventilation and air conditioning ducts. It is intrinsically safe, with sensor break detection. If the capillary tube diaphragm system is damaged, the frost sensor automatically switches to the heating function. The FST 3 is also suitable for monitoring liquids. The sensor tube can be installed in an immersion sleeve. Delivery includes mounting clamps MK-05-K.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255141237067,"sku":"1102-1025-1100-000","price":59.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/FST-1-R__thor2_mini_4c_ed06f31f-0bf5-4c41-98fa-8621f7968239.png?v=1769675302"},{"product_id":"druckmessumformer-premasgard-shd-692-u-912-lcd-0-10v-0-1-bar-1301-4121-1520-000","title":"PREMASGARD® SHD 692-U-912 LCD","description":"The PREMASGARD® SHD-692 pressure sensor\/differential pressure sensor is used to measure pressures in gaseous and liquid media. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIt converts the measured variable into a standard signal of 0-10 V or 4...20 mA. Process connection 2 x G ⅛ \" - 27 NPT female thread. The SHD-692 differential pressure transmitter is used in pipelines and hydraulic systems, in mechanical and plant engineering and in building automation. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255254253899,"sku":"1301-4121-1520-000","price":381.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-692-Display__maxi-mL_4c_aeb3ea80-642c-4bf0-84e4-110f922e43b6.png?v=1769664192"},{"product_id":"druckmessumformer-premasgard-shd-692-u-916-lcd-0-10v-0-2-5-bar-1301-4121-1530-000","title":"PREMASGARD® SHD 692-U-916 LCD","description":"The PREMASGARD® SHD-692 pressure sensor\/differential pressure sensor is used to measure pressures in gaseous and liquid media. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIt converts the measured variable into a standard signal of 0-10 V or 4...20 mA. Process connection 2 x G ⅛ \" - 27 NPT female thread. The SHD-692 differential pressure transmitter is used in pipelines and hydraulic systems, in mechanical and plant engineering and in building automation. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255255007563,"sku":"1301-4121-1530-000","price":381.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-692-Display__maxi-mL_4c_555c84d0-4c1b-43ff-8d81-e089b1e3eb4e.png?v=1769664267"},{"product_id":"druckmessumformer-premasgard-shd-692-u-918-lcd-0-10v-0-4-bar-1301-4121-1540-000","title":"PREMASGARD® SHD 692-U-918 LCD","description":"The PREMASGARD® SHD-692 pressure sensor\/differential pressure sensor is used to measure pressures in gaseous and liquid media. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIt converts the measured variable into a standard signal of 0-10 V or 4...20 mA. Process connection 2 x G ⅛ \" - 27 NPT female thread. The SHD-692 differential pressure transmitter is used in pipelines and hydraulic systems, in mechanical and plant engineering and in building automation. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255255105867,"sku":"1301-4121-1540-000","price":381.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-692-Display__maxi-mL_4c_669a84b5-c434-4be6-8d03-191693cc482e.png?v=1769664343"},{"product_id":"druckmessumformer-premasgard-shd-692-u-919-lcd-0-10v-0-6-bar-1301-4121-1550-000","title":"PREMASGARD® SHD 692-U-919 LCD","description":"The PREMASGARD® SHD-692 pressure sensor\/differential pressure sensor is used to measure pressures in gaseous and liquid media. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIt converts the measured variable into a standard signal of 0-10 V or 4...20 mA. Process connection 2 x G ⅛ \" - 27 NPT female thread. The SHD-692 differential pressure transmitter is used in pipelines and hydraulic systems, in mechanical and plant engineering and in building automation. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255255269707,"sku":"1301-4121-1550-000","price":381.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-692-Display__maxi-mL_4c_59348850-0ed5-4e37-9016-4fc599dc5497.png?v=1769664419"},{"product_id":"druckmessumformer-premasgard-shd-692-u-930-lcd-0-10v-0-10-bar-1301-4121-1560-000","title":"PREMASGARD® SHD 692-U-930 LCD","description":"The PREMASGARD® SHD-692 pressure sensor\/differential pressure sensor is used to measure pressures in gaseous and liquid media. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIt converts the measured variable into a standard signal of 0-10 V or 4...20 mA. Process connection 2 x G ⅛ \" - 27 NPT female thread. The SHD-692 differential pressure transmitter is used in pipelines and hydraulic systems, in mechanical and plant engineering and in building automation. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255257530699,"sku":"1301-4121-1560-000","price":692.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-692-Display__maxi-mL_4c_2f295a26-f25c-403c-81b5-8b9f50a44351.png?v=1769664494"},{"product_id":"druckmessumformer-premasgard-shd-692-i-912-lcd-4-20ma-0-1-bar-1301-4122-1520-000","title":"PREMASGARD® SHD 692-I-912 LCD","description":"The PREMASGARD® SHD-692 pressure sensor\/differential pressure sensor is used to measure pressures in gaseous and liquid media. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIt converts the measured variable into a standard signal of 0-10 V or 4...20 mA. Process connection 2 x G ⅛ \" - 27 NPT female thread. The SHD-692 differential pressure transmitter is used in pipelines and hydraulic systems, in mechanical and plant engineering and in building automation. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255257989451,"sku":"1301-4122-1520-000","price":381.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-692-Display__maxi-mL_4c_879107c2-208b-42e0-b896-cadf428e39ac.png?v=1769663441"},{"product_id":"druckmessumformer-premasgard-shd-692-i-918-lcd-4-20ma-0-4-bar-1301-4122-1540-000","title":"PREMASGARD® SHD 692-I-918 LCD","description":"The PREMASGARD® SHD-692 pressure sensor\/differential pressure sensor is used to measure pressures in gaseous and liquid media. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIt converts the measured variable into a standard signal of 0-10 V or 4...20 mA. Process connection 2 x G ⅛ \" - 27 NPT female thread. The SHD-692 differential pressure transmitter is used in pipelines and hydraulic systems, in mechanical and plant engineering and in building automation. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255258480971,"sku":"1301-4122-1540-000","price":692.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-692-Display__maxi-mL_4c_20bd973c-7976-4ba3-a7a9-a126609bec23.png?v=1769663593"},{"product_id":"druckmessumformer-premasgard-shd-692-i-919-lcd-4-20ma-0-6-bar-1301-4122-1550-000","title":"PREMASGARD® SHD 692-I-919 LCD","description":"The PREMASGARD® SHD-692 pressure sensor\/differential pressure sensor is used to measure pressures in gaseous and liquid media. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIt converts the measured variable into a standard signal of 0-10 V or 4...20 mA. Process connection 2 x G ⅛ \" - 27 NPT female thread. The SHD-692 differential pressure transmitter is used in pipelines and hydraulic systems, in mechanical and plant engineering and in building automation. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255258513739,"sku":"1301-4122-1550-000","price":381.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-692-Display__maxi-mL_4c_6aa096fd-c7f7-4ea1-9d27-14c346139674.png?v=1769663668"},{"product_id":"druckmessumformer-premasgard-shd-i-1-lcd-0-1-bar-1301-2112-1520-120","title":"PREMASGARD® SHD-I 1 LCD","description":"The PREMASGARD® SHD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \".\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The pressure transmitter is suitable for measuring pressures in gaseous and liquid media It is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. The PREMASGARD® SHD-SD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \". It is used to measure pressures in gaseous and liquid media. This pressure transmitter is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255270801739,"sku":"1301-2112-1520-120","price":297.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-Display__maxi-mL_4c.png?v=1769664575"},{"product_id":"druckmessumformer-premasgard-shd-i-6-lcd-0-6-bar-1301-2112-1550-120","title":"PREMASGARD® SHD-I 6 LCD","description":"The PREMASGARD® SHD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \".\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The pressure transmitter is suitable for measuring pressures in gaseous and liquid media It is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. The PREMASGARD® SHD-SD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \". It is used to measure pressures in gaseous and liquid media. This pressure transmitter is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255271162187,"sku":"1301-2112-1550-120","price":474.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-Display__maxi-mL_4c_ccf22aed-b33c-4d1d-abe2-08387764136b.png?v=1769665109"},{"product_id":"druckmessumformer-premasgard-shd-u-1-lcd-0-1-bar-1301-2111-1520-220","title":"PREMASGARD® SHD-U 1 LCD","description":"The PREMASGARD® SHD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \".\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The pressure transmitter is suitable for measuring pressures in gaseous and liquid media It is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. The PREMASGARD® SHD-SD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \". It is used to measure pressures in gaseous and liquid media. This pressure transmitter is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255277977931,"sku":"1301-2111-1520-220","price":297.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-Display__maxi-mL_4c_e977937d-b92c-4200-a380-0c3f6fb2d13d.png?v=1769666103"},{"product_id":"druckmessumformer-premasgard-shd-u-2-5-lcd-0-2-5-bar-1301-2111-1530-220","title":"PREMASGARD® SHD-U 2.5 LCD","description":"The PREMASGARD® SHD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \".\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The pressure transmitter is suitable for measuring pressures in gaseous and liquid media It is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. The PREMASGARD® SHD-SD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \". It is used to measure pressures in gaseous and liquid media. This pressure transmitter is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255278010699,"sku":"1301-2111-1530-220","price":297.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-Display__maxi-mL_4c_6aec3f8f-c566-443c-8b4a-643e1c27582d.png?v=1769666374"},{"product_id":"druckmessumformer-premasgard-shd-u-6-lcd-0-6-bar-1301-2111-1550-220","title":"PREMASGARD® SHD-U 6 LCD","description":"The PREMASGARD® SHD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \".\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The pressure transmitter is suitable for measuring pressures in gaseous and liquid media It is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. The PREMASGARD® SHD-SD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \". It is used to measure pressures in gaseous and liquid media. This pressure transmitter is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255278141771,"sku":"1301-2111-1550-220","price":474.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-Display__maxi-mL_4c_253e1190-d492-40b6-8b48-bc9fa29b6505.png?v=1769666647"},{"product_id":"druckmessumformer-premasgard-shd-u-10-lcd-0-10-bar-1301-2111-1560-220","title":"PREMASGARD® SHD-U 10 LCD","description":"The PREMASGARD® SHD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \".\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The pressure transmitter is suitable for measuring pressures in gaseous and liquid media It is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. The PREMASGARD® SHD-SD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \". It is used to measure pressures in gaseous and liquid media. This pressure transmitter is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255278436683,"sku":"1301-2111-1560-220","price":474.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-Display__maxi-mL_4c_95960dea-a4b7-4d74-ac51-228c2cf1d87b.png?v=1769666193"},{"product_id":"druckmessumformer-premasgard-shd-u-16-lcd-0-16-bar-1301-2111-1570-220","title":"PREMASGARD® SHD-U 16 LCD","description":"The PREMASGARD® SHD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \".\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The pressure transmitter is suitable for measuring pressures in gaseous and liquid media It is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. The PREMASGARD® SHD-SD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \". It is used to measure pressures in gaseous and liquid media. This pressure transmitter is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255278698827,"sku":"1301-2111-1570-220","price":474.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-Display__maxi-mL_4c_6c7789f3-1a83-476b-bc14-1e592d5b94e4.png?v=1769666284"},{"product_id":"druckmessumformer-premasgard-shd-sd-i-6-0-6-bar-1301-2122-0550-000","title":"PREMASGARD® SHD-SD-I 6","description":"The PREMASGARD® SHD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \".\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The pressure transmitter is suitable for measuring pressures in gaseous and liquid media It is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. The PREMASGARD® SHD-SD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \". It is used to measure pressures in gaseous and liquid media. This pressure transmitter is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255279386955,"sku":"1301-2122-0550-000","price":55.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD__maxi-mL_4c_245a9e13-75aa-4155-8045-d9827aea450c.png?v=1769665598"},{"product_id":"druckmessumformer-premasgard-shd-sd-i-10-0-10-bar-1301-2122-0560-000","title":"PREMASGARD® SHD-SD-I 10","description":"The PREMASGARD® SHD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \".\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The pressure transmitter is suitable for measuring pressures in gaseous and liquid media It is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. The PREMASGARD® SHD-SD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \". It is used to measure pressures in gaseous and liquid media. This pressure transmitter is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255279616331,"sku":"1301-2122-0560-000","price":55.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD__maxi-mL_4c_51ee1f34-4051-4b0d-8635-d7d06ce5d2b7.png?v=1769665420"},{"product_id":"druckmessumformer-premasgard-shd-sd-i-16-0-16-bar-1301-2122-0570-000","title":"PREMASGARD® SHD-SD-I 16","description":"The PREMASGARD® SHD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \".\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The pressure transmitter is suitable for measuring pressures in gaseous and liquid media It is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. The PREMASGARD® SHD-SD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \". It is used to measure pressures in gaseous and liquid media. This pressure transmitter is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255279944011,"sku":"1301-2122-0570-000","price":55.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD__maxi-mL_4c_085e66f4-7a44-4fda-889f-2f5a104cb620.png?v=1769665509"},{"product_id":"druckmessumformer-premasgard-shd-sd-i-6-lcd-0-6-bar-1301-2122-1550-000","title":"PREMASGARD® SHD-SD-I 6 LCD","description":"The PREMASGARD® SHD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \".\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The pressure transmitter is suitable for measuring pressures in gaseous and liquid media It is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. The PREMASGARD® SHD-SD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \". It is used to measure pressures in gaseous and liquid media. This pressure transmitter is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255279976779,"sku":"1301-2122-1550-000","price":245.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-Display__maxi-mL_4c_f21f16df-4428-477f-baa9-6ae1b9dd836b.png?v=1769665635"},{"product_id":"druckmessumformer-premasgard-shd-sd-u-6-0-6-bar-1301-2121-0550-120","title":"PREMASGARD® SHD-SD-U 6","description":"The PREMASGARD® SHD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \".\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The pressure transmitter is suitable for measuring pressures in gaseous and liquid media It is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. The PREMASGARD® SHD-SD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \". It is used to measure pressures in gaseous and liquid media. This pressure transmitter is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255280271691,"sku":"1301-2121-0550-120","price":55.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD__maxi-mL_4c_80cc8cbd-8f0a-40ca-94b4-3d009b4b1ac3.png?v=1769665977"},{"product_id":"druckmessumformer-premasgard-shd-sd-u-10-0-10-bar-1301-2121-0560-120","title":"PREMASGARD® SHD-SD-U 10","description":"The PREMASGARD® SHD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \".\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The pressure transmitter is suitable for measuring pressures in gaseous and liquid media It is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. The PREMASGARD® SHD-SD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \". It is used to measure pressures in gaseous and liquid media. This pressure transmitter is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255280369995,"sku":"1301-2121-0560-120","price":55.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD__maxi-mL_4c_55523ead-88ec-4410-8a33-9865fd456d2b.png?v=1769665798"},{"product_id":"druckmessumformer-premasgard-shd-sd-u-16-0-16-bar-1301-2121-0570-120","title":"PREMASGARD® SHD-SD-U 16","description":"The PREMASGARD® SHD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \".\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The pressure transmitter is suitable for measuring pressures in gaseous and liquid media It is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. The PREMASGARD® SHD-SD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \". It is used to measure pressures in gaseous and liquid media. This pressure transmitter is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255281221963,"sku":"1301-2121-0570-120","price":55.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD__maxi-mL_4c_3b7fd7e7-01f6-4473-bbd5-f3025a79e0cf.png?v=1769665887"},{"product_id":"druckmessumformer-premasgard-shd-sd-u-6-lcd-0-6-bar-1301-2121-1550-120","title":"PREMASGARD® SHD-SD-U 6 LCD","description":"The PREMASGARD® SHD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \".\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The pressure transmitter is suitable for measuring pressures in gaseous and liquid media It is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. The PREMASGARD® SHD-SD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \". It is used to measure pressures in gaseous and liquid media. This pressure transmitter is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255281320267,"sku":"1301-2121-1550-120","price":245.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-Display__maxi-mL_4c_2c2cb309-3d44-4a18-9d85-11305b6036d1.png?v=1769666015"},{"product_id":"druckmessumformer-premasgard-shd-sd-u-10-lcd-0-10-bar-1301-2121-1560-120","title":"PREMASGARD® SHD-SD-U 10 LCD","description":"The PREMASGARD® SHD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \".\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The pressure transmitter is suitable for measuring pressures in gaseous and liquid media It is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. The PREMASGARD® SHD-SD pressure transmitter measures relative pressures in the bar range. It converts the measured variable into a standard signal of 0-10 V or 4...20 mA. The process connection is G ½ \". It is used to measure pressures in gaseous and liquid media. This pressure transmitter is used in hydraulics, pneumatics, process technology, mechanical and plant engineering. \u003cbr\u003eNot suitable for ammonia and freons!","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51255281385803,"sku":"1301-2121-1560-120","price":245.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/SHD-Display__maxi-mL_4c_53b3d6bb-00ef-41b2-ae49-50e54e254f06.png?v=1769665836"}],"url":"https:\/\/www.spluss.es\/en\/collections\/venta.oembed?page=2","provider":"S+S Regeltechnik","version":"1.0","type":"link"}