CO2

Product description
- 0...2000 ppm / 0...5000 ppm
- Carbon dioxide (CO2)
- 0-10V / 4..20mA, 1 changeover contact (24 V)
- Display
- IP 30
Maintenance-free room climate sensor AERASGARD® RCO2 - SD with active output, automatic calibration (fixed setting), in an attractive plastic housing with snap-on lid, for determining the CO2 content of the air (0...2000 ppm). The transmitter converts the measured variables into a standard signal of 0-10 V.
Maintenance-free room climate sensor AERASGARD® RCO2 - W with active/switching output, automatic calibration (can be switched off), in an attractive plastic housing with snap-on lid, optionally with traffic light display (five colored LEDs), for determining the CO2 content of the air (0...2000 ppm / 0...5000 ppm). The transmitter converts the measured variables into a standard signal of 0-10 V or 4...20 mA (switchable).
The sensor is used in schools, public buildings, offices, hotels, conference rooms, apartments, stores, etc. and is used to evaluate the indoor climate. This enables energy-saving, needs-based room ventilation and thus a reduction in operating costs and an increase in well-being.
CO2 is measured using an optical NDIR sensor (non-dispersive infrared technology). The detection range is calibrated for standard applications such as residential and conference room monitoring.
Maintenance-free room climate sensor AERASGARD® RCO2 - W with active/switching output, automatic calibration (can be switched off), in an attractive plastic housing with snap-on lid, optionally with traffic light display (five colored LEDs), for determining the CO2 content of the air (0...2000 ppm / 0...5000 ppm). The transmitter converts the measured variables into a standard signal of 0-10 V or 4...20 mA (switchable).
The sensor is used in schools, public buildings, offices, hotels, conference rooms, apartments, stores, etc. and is used to evaluate the indoor climate. This enables energy-saving, needs-based room ventilation and thus a reduction in operating costs and an increase in well-being.
CO2 is measured using an optical NDIR sensor (non-dispersive infrared technology). The detection range is calibrated for standard applications such as residential and conference room monitoring.
Technical data
| Measurement | CO2 |
| Power supply | 24 V AC/DC (± 10 %) |
| Output | 0-10V / 4..20mA, 1 changeover contact (24 V) |
| Display | Yes |
| Measured quantity in addition to °C + %RH | none |
| Measuring range | 0...2000 ppm or 0...5000 ppm (selectable via DIP switch) |
| Features | changeover contact |
| Output | 0 -10 V or 4...20 mA, load < 800 Ω (selectable via DIP switch) with offset potentiometer (± 10 % of the measuring range) |
| Output | active (0 -10 V / 4...20 mA), changeover contact |
We also manufacture individually
Do you have special requirements? As a manufacturer with our own production facilities in Germany, we are always in a position to produce products outside the standard range.
Contact us
Secure payment methods
Do you have a question? We are at your disposal:
+49 911 519 470
Mo. - Fr. 7.00am - 5.00pm CEST